The purpose of the aluminum strip of insulating glass is to serve as a framework and to store desiccants

而插角拼接鋁條和一體折彎鋁條的區別就在于接口的多少

The difference between corner spliced aluminum strips and integrated bent aluminum strips lies in the number of interfaces

插角拼接需要在四個角落使用插角進行拼接固定，然后再用密封膠進行密封

Corner splicing requires the use of corner splices at four corners for fixation and sealing with sealant

尤其是在四個角的位置，需要著重的進行密封處理，保證不會有漏氣的情況出現

Especially at the four corners, it is necessary to focus on sealing treatment to ensure that there will be no air leakage

而一體折彎鋁條相對于插角鋁條，在四個角落上的密封性就會好一些

Compared to the angled aluminum strip, the integrated bending aluminum strip has better sealing performance at all four corners

但是中空玻璃的密封性好壞，大部分是依賴于一道密封膠和二道密封膠，鋁條起到的決定因素其實占比不大

However, the sealing performance of insulating glass mostly depends on one layer of sealant and two layers of sealant, and the decisive factor played by aluminum strips is actually not a large proportion

只要是廠家按照制作施工標準，嚴格地來進行密封膠的密封處理，使用插角鋁條還是一體折彎鋁條，其實都是一樣的，是沒有什么差別的；除了一體折彎鋁條在外觀上來看會好好看一些除外。

As long as the manufacturer strictly seals the sealant according to the production and construction standards, whether to use angled aluminum strips or integrated bent aluminum strips, it is actually the same and there is no difference; Except for the one piece bending aluminum strip that looks better in appearance.

炸好的鴨子根據需要，改刀切成合適的大小，即可上桌食用。

The fried duck can be cut into appropriate sizes with a knife as needed, and can be served for consumption.

本文由全自動鋁條折彎機友情奉獻.更多有關的知識請點擊:http://m.whooo.net真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is dedicated by the fully automatic aluminum bar bending machine. For more information, please click on: http://m.whooo.net Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned