1. 如果主動上膠機沒有自吸功能，會(huì )出現漏膠、掉膠現象;
　　1. If the active glue loader has no self-priming function, there will be glue leakage and glue dropping;
　　2. 氣壓過高會(huì )出現漏膠現象;
　　2. Rubber leakage will occur if the air pressure is too high;

　　3、如果是用于橡膠閥，則橡膠閥接口漏膠，可能要先清洗后重新安裝，或更換零件。
　　3. If it is used for rubber valve, the rubber valve interface leaks rubber, which may need to be cleaned before reinstallation, or replacement parts.
　　4、有的使用的管道比上膠機多，檢查軟管是否連接好，有的還會(huì )由于接口不接口，導致空氣中漏膠。
　　4. Some use more pipes than glue machine, check whether the hose is well connected, and some will cause glue leakage in the air because the interface is not connected.
　　以上是雙組份打膠機生產廠家為大家介紹的相關內容，想要了解更多內容，歡迎訪問網站：http://linshi.jncsjx.com
　　The above is the relevant content introduced by the manufacturer of two-component dispenser. For more information, please visit the website: http://linshi.jncsjx.com