雙組份打膠機主要是由打膠機頭、機頭軌道以及操作小車組成，其中打膠機頭是完成打膠工作的重要部件，后的膠體是通過打膠機頭均勻的涂抹在雙組份上面的，另外打膠機設備當中也包含有各種的傳感裝置以便檢測雙組份的狀態以及打膠的狀態。

　　A two-component glue machine is mainly composed of rubber head, head rail and trolley operation, which is an important component of the glue machine glue work, finally through colloidal glue head evenly coated in the above two components, in addition to play among the glue machine equipment is also included to have a variety of sensing device detection of two-component glue of the state and state.

　　一般情況下出現雙組份打膠機打膠不飽滿的問題大多數是由于人為原因導致的，當然有設備的原因只是出現的概率相對較低。我們說說人為原因導致的這種情況都有哪些。一種情況是由于我們將打膠機的打膠速度設置的過快導致的。

　　In general, the problem of double glue beating machine is not due to human reasons, of course, the reason for the equipment is only relatively low probability of occurrence. First of all, let's talk about what this is caused by human factors. One reason is that we set too fast the sizing speed of the glue machine.

　　有的客戶為了加快自己的生產節奏追趕生產計劃，將打膠速度認為調整的過快，導致膠體還沒有完全達到合格標準機頭就已經移動到下一個位置進行打膠操作了，如果我們需要加快打膠的速度調整了打膠機的移動參數的話，那么我們對應的也應該對供膠系統也進行相應的設置，比如這時候我們就需要加大供膠壓力，增大打膠機的出膠速度來配合對象的移動速度的增加。

　　Some customers in order to speed up its own rhythm of production after the production plan, the speed adjustment of the glue that is too fast, resulting in the colloid is still not fully meet the eligibility criteria of head has been moved to the next position of the glue operation, if the mobile parameter we need to accelerate the speed of adjustment of the glue glue machine. So, we should also carry out corresponding setting on the glue supply system, for example, this time we need to increase the glue supply pressure, increase the speed of glue machine glue to match the object's speed increase.

　　如果我們僅僅是單獨的增加了打膠機的移動速度而沒有對壓力進行調節的話就很有可能出現打膠不飽滿的情況發生。另外一種情況跟打膠機的速度差不多就是我們的供膠壓力不足導致的。

　　If we just increase the speed of the glue machine alone without adjusting the pressure, it is likely that the glue is not full. Another situation is the speed of the glue machine, which is our insufficient glue pressure.

　　我們愿以佳的服務意識，迎接八方來客，誠懇與各界朋友精誠合作，共創(chuàng )美好的前程。歡迎大家前來參觀洽談!

　　We are willing to meet the eight party visitors with the best service consciousness, sincere cooperation with friends from all walks of life at home